1200 Engine rebuild and other stuff
Moderator: gk
Re: 1200 Engine rebuild and other stuff
Hi Falco
Thanks and no worries, have not had time to play with this properly yet
My main consern is the other end. This is how to connect meter to ignition and especially to TPS. Where do i find points and whic connection type is functional?
Thanks and no worries, have not had time to play with this properly yet
My main consern is the other end. This is how to connect meter to ignition and especially to TPS. Where do i find points and whic connection type is functional?
- Dateianhänge
-
- Screenshot 2023-08-08 at 8.21.22.png (238.6 KiB) 1934 mal betrachtet
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
i did it like the version "best".
I opend the main cabel "pipe" from/to the ECU.
15 cm behind and i used normal cable quick fastener...
I opend the main cabel "pipe" from/to the ECU.
15 cm behind and i used normal cable quick fastener...
Moto Morini Shop: www.bessergemacht.de
Spezialteile für unsere 1200 Morinis.
Viele Grüße aus Dresden
Falko
Spezialteile für unsere 1200 Morinis.
Viele Grüße aus Dresden
Falko
Re: 1200 Engine rebuild and other stuff
To which wire did you connect it?
- Dateianhänge
-
- TPS.png (35.77 KiB) 1118 mal betrachtet
Br,
Vesa
Vesa
-
- Morinisti
- Beiträge: 246
- Registriert: Montag 24. Dezember 2012, 17:18
- Wohnort: 75233 Tiefenbronn
Re: 1200 Engine rebuild and other stuff
Hi Vesa,
to pin C on the "potenziometro farfalla". Here you get a voltage between about 0,06 (fully closed) and 4,24 V (fully open).
So long, Benedikt
to pin C on the "potenziometro farfalla". Here you get a voltage between about 0,06 (fully closed) and 4,24 V (fully open).
So long, Benedikt
Die kürzeste Verbindung zwischen zwei Punkten ist eine Gerade, die schönste eine Kurve !
Re: 1200 Engine rebuild and other stuff
Oil temperature is nice to know...
Used this as starting point https://www.aliexpress.com/item/1005006170263037.html
After some lathe work:
Used this as starting point https://www.aliexpress.com/item/1005006170263037.html
After some lathe work:
- Dateianhänge
-
- IMG20240417130324.jpg (174.18 KiB) 438 mal betrachtet
-
- IMG20240417130223.jpg (325.59 KiB) 438 mal betrachtet
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
More trouble...
Speedometer has some issues... Anyone have a idea what can it be?
https://1drv.ms/v/s!AvmtFtbY1WJ-hOtn2R0 ... A?e=LpKbzX
Part no M30600002400
Speedometer has some issues... Anyone have a idea what can it be?
https://1drv.ms/v/s!AvmtFtbY1WJ-hOtn2R0 ... A?e=LpKbzX
Part no M30600002400
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
Hi Vesa,
This screen appears when the Dashboard was in "operation hours" mode and you switch on the ignition while holding the black selector button. Maybe the button is always pressed by a dislocated rubber cover.
Heinz
This screen appears when the Dashboard was in "operation hours" mode and you switch on the ignition while holding the black selector button. Maybe the button is always pressed by a dislocated rubber cover.
Heinz
MM Scrambler 1200
Honda CB 550 F2
Honda CB 550 F2